? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 cascadable amplifier 10 to 500 mhz rev. v3 A75-3 / smA75-3 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: z 0 = 50 ? , v cc = +15 v dc parameter units typical guaranteed 25oc 0o to 50oc -54o to +85oc* frequency mhz 1-600 10-500 10-500 small signal gain (min) db 20.5 19.5 19.0 gain flatness (max) db 0.2 0.5 0.7 reverse isolation db 25 noise figure (max) db 1.7 2.3 2.8 power output @ 1 db comp. (min) dbm 3.0 2.0 1.5 ip3 dbm +16 ip2 dbm +15 second order harmonic ip dbm +21 vswr input / output (max) 1.5:1 / 1.5:1 1.8:1 / 1.8:1 2.0:1 / 2.0:1 dc current @ 15 volts (max) ma 14 16 18 features ? high gain: 20.5 db (typ.) ? low noise: 1.7 db (typ.) description the A75-3 rf amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. this single stage bipolar transist or feedback amplifier design displays impressive performance over a broadband frequency range. both to-8 and surface mount packages are hermetically sealed, and mil-std-883 environmental screen- ing is available . product image ordering information part number package A75-3 to-8 smA75-3 surface mount maam-008317-ca7503 sma connectorized ** absolute maximum ratings parameter absolute maximum storage temperature -62oc to +125oc case temperature 125oc dc voltage +21 v continuous input power +13 dbm short term input power (1 minute max.) 50 mw peak power (3 sec max.) 0.5 w ?s? series burn-in temperature (case) 125oc thermal data: v cc = +15 v dc parameter rating thermal resistance jc 170oc/w transistor power dissipation p d 0.099 w junction temperature rise above case t jc 17oc * over temperature performance limits for part number cA75-3, guaranteed from 0 o c to +50 o c only. ** the connectorized version is not rohs compliant.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 cascadable amplifier 10 to 500 mhz rev. v3 A75-3 / smA75-3 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. outline drawing: to-8 * ? dimensions are inches (millimeters) 0. 015 (0.38) unless otherwise specified. typical performance curves at +25c outline drawing: surface mount * outline drawing: sma connectorized * weight: 1 gram (0.04 oz.) max weight: 1 gram (0.04 oz.) max weight: 19 grams (0.67 oz.) max
|